Radius Trimmer FR156N+CA56U (FR256N) by Virutex


Radius trimmer, for trimming edges of PVC and veneer. Equipped with r=3 mm bit with bearing. Optional bits are also available for several different radius. It enables the trimming the four sides of the board at once. Powerful motor (750W) and electronic speed adjustmnet. Also equipped with electronic control maintaining the speed constant, independently than the working load. Dust collector connection and three bases (hole Ø 20, 26 & 30 mm) for using with bits of different diameters.


The FR156N is available as a set (FR256N) including the FR156N edge trimmer and the CA56U trimming head which allows to trimm all the edges of the panel continuously. The CA56U trimming head has a large support surface and an auxiliary knob. Ideal for trimming work on the panel edge.



  • Double insulation        
  • Input power:        750W
  • Chuck collet:        8 mm
  • No-load speed:        14.000-30.000 /min
  • Weight:        1.6 Kg


Optional Accessories (FR256N):-

  • 1222084 Chuck collet 6 mm
  • 1222085 Chuck collet 6.35 mm (1/4”)
  • 6446073 Standard dust collector attachment 3.5 m
  • 1746245 Standard dust collector attachment 5 m
  • 1140106 HM bit r=3 mm with bearing
  • 1140109 HM bit r=6 mm with bearing
  • 1140110 HM bit r=8 mm with bearing
  • Professional bits


Standard Equipment (FR256N only):-

  • FR156N edge trimmer
  • 1140123 carbide bit r:2 with bearing
  • CA56U trimming head (5600060)
  • Carrying case
  • Standard equipment


Full 12 Month Manufacturer Warranty

VIRUTEX Radius Trimmer FR156N+CA56U (FR256N)

SKU: 56714