RAKOLL® GXL3P Quality PVA Glue 5ltr or 20ltr
 
RAKOLL® GXL3P is a PVA glue with water resistance, which meets D3 requirement according to EN 204. GXL3P sets quickly. The set glue joints are very strong and have a good resistance to high temperature. When catalysed, GXL3P exceeds the D4 requirements according to EN 204.
 
Key Benefits
Fast setting time
Suitable on both hardwood and softwoods and chipboards
Can be used for stationary edge gluing on solid wood stripe, veneers and plastic laminates
 
Uses
Moisture resistant gluing of windows, doors and stairs according to EN204/D3.
Surface bonding of decorative papers.  High frequency bonding.
Stationary edge gluing with veneers, plastic laminates and solid wood stripe.
Surface bonding of decorative high pressure laminates in short-cycle press.
Cabinet and assembly bonding with medium pressing times and preheating devices.
Board joint and block gluing of softwood, hardwoods and chipboards
 
Compatible Substrates
Timber
Plywood
Particleboard
Concrete
Fibre cement sheeting
Plasterboard
Polystyrene
 
Packaging Options
5ltr Plastic Bottle
20ltr Plastic Drum 
​​​​​​​A FREIGHT QUOTE IS REQUIRED FOR ITEMS OVER 20KG - CONTACT US BEFORE PAYING Ph 07 3705 8558
 
Fields of application
Moisture resistant gluing of windows, doors and stairs according to EN204/D3.
Surface bonding of decorative papers.
High frequency bonding.
Stationary edge gluing with veneers, plastic laminates and solid wood stripe.
Surface bonding of decorative high pressure laminates in short-cycle press.
Cabinet and assembly bonding with medium pressing times and preheating devices.
Board joint and block gluing of softwood, hardwoods and chipboards
 
Instructions for use
The open assembly and setting times largely depend upon the working conditions such as temperatures, moisture, absorbency of materials, glue spreads and tensions of the materials.
 
Good results are obtained under the following conditions:
Stir well before use
Room, material and glue temperature 18 - 20 C
Wood moisture 8 - 10 %
Relative humidity 60 - 70 %
Glue spread: for surface bonding 80 - 140 g/m 2  for assembly bonding 160 - 180 g/m2
Open assembly time for 150 g/m2   8 - 10 min.
Pressure depending on type  of gluing 0.1 - 0.8 N/mm2

Minimum pressing times:  
Surface gluing of decorative papers from 10 sec.
High frequency gluing with longitudinal heating from 20 sec.
Surface gluing of high-pressure laminates in short-cycle presses (+70C) from 60 sec.
Assembly bonding 30 mins.
Board joint and blocks bonding 45 mins.
 
Chemical - technical data
Base PVA Dispersion Colour white
pH-value 2.7 – 3.7
Chalk point + 3C
Viscosity(#5/10rpm/20°C) 9,300 – 13,500 cP
Total solids 48-50%